Deep UV uvc-led module – UV LEDs https://uvleds.net/ Mon, 20 May 2024 14:10:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 XX001 Deep UV uvc-led module https://uvleds.net/product/xx001-deep-uv-uvc-led-module/ https://uvleds.net/product/xx001-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:53:16 +0000 https://uvleds.net/?post_type=product&p=173
  • COB light source, realizing linear ultraviolet coverage
  • Aluminum substrate solves the heat dissipation problem and improves the stability of light source
  • Integrated quartz glass sheet, dustproof, sealed and anti-scratch
    • ]]>
  • Product photos
    • XX001
    • product mix

    XX001

    • The thickness of Al substrate is 2mm& nbsp;
    • Dimensional tolerance: base plate length/width ± 0.2mm, base plate thickness ± 0.1mm.
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf 5 / 7 V
    Driving current If / 300 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 60 / 80 mW
    Irritation angle 2θ1/2 / 140 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/xx001-deep-uv-uvc-led-module/feed/ 0     CY003 Deep UV uvc-led module https://uvleds.net/product/cy003-deep-uv-uvc-led-module/ https://uvleds.net/product/cy003-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:48:09 +0000 https://uvleds.net/?post_type=product&p=169
  • 10 lamp beads are evenly arranged to produce a uniform disinfection and sterilization effect
  • Surface light source emits light, fully realizing internal cavity sterilization
  • Strong light source array, making the freezer bacteria nowhere to hide
  • Purify organic gas and prevent cabinet body from smelling
    • ]]>
  • Product photos
    • CY003
    • product mix

    CY003

    • Application field: take-out cabinet, food cabinet
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 40 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 4 / 6 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/cy003-deep-uv-uvc-led-module/feed/ 0     CY002 Deep UV uvc-led module https://uvleds.net/product/cy002-deep-uv-uvc-led-module/ https://uvleds.net/product/cy002-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:43:21 +0000 https://uvleds.net/?post_type=product&p=164
  • 10 lamp beads are evenly arranged to produce a uniform disinfection and sterilization effect
  • Surface light source emits light, fully realizing internal cavity sterilization
  • Strong light source array, making the freezer bacteria nowhere to hide
  • Purify organic gas and prevent cabinet body from smelling
    • ]]>
  • Product photos
    • CY002
    • product mix

    CY002

    • Application field: freezer, disinfection cabinet
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 500 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 150 / 200 mW
    Irritation angle 2θ1/2 / 60 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/cy002-deep-uv-uvc-led-module/feed/ 0     CY001 Deep UV uvc-led module https://uvleds.net/product/cy001-deep-uv-uvc-led-module/ https://uvleds.net/product/cy001-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:31:55 +0000 https://uvleds.net/?post_type=product&p=159
  • Flexible surface sterilization unit
  • High cost performance and availability
  • The product is small and applicable to a wide range of scenarios
    • ]]>
  • Product photos
    • CY001
    • product mix

    CY001

    • Application fields: cupboards, food cabinets, disinfection cabinets
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 6 / V
    Driving current If / 40 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 4 / 6 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/cy001-deep-uv-uvc-led-module/feed/ 0     XWJ01 Deep UV uvc-led module https://uvleds.net/product/xwj01-deep-uv-uvc-led-module/ https://uvleds.net/product/xwj01-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:22:03 +0000 https://uvleds.net/?post_type=product&p=154
  • White light+UVC+UVA multi-function integration
  • The outer ring bulges for easy assembly
  • Strong anti-interference ability of circuit
  • Symmetrical design of lamp beads, good sterilization effect
    • ]]>
  • Product photos
    • XWJ01
    • product mix

    XWJ01

    • Application field: dishwasher
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 40 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 6 / 8 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/xwj01-deep-uv-uvc-led-module/feed/ 0     XYJ02 Deep UV uvc-led module https://uvleds.net/product/xyj02-deep-uv-uvc-led-module/ https://uvleds.net/product/xyj02-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:12:51 +0000 https://uvleds.net/?post_type=product&p=149
  • Good thermal management, low light decay and long service life
  • Industrial standard
  • High air tightness
  • low consumption
  • Large heat dissipation area, suitable for complex working environment
    • ]]>
  • Product photos
    • XYJ02
    • product mix

    XYJ02

    • Application field: washing machine
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 40 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 6 / 8 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/xyj02-deep-uv-uvc-led-module/feed/ 0     XYJ01 Deep UV uvc-led module https://uvleds.net/product/xyj01-deep-uv-uvc-led-module/ https://uvleds.net/product/xyj01-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 13:05:19 +0000 https://uvleds.net/?post_type=product&p=144
  • Lighting+UVC dual-function integration
  • Compact and highly integrated
  • Panoramic light output improves irradiation range
    • ]]>
  • Product photos
    • XYJ01
    • product mix

    XYJ01

    • Application field: washing machine, etc
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 55 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 6 / 8 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/xyj01-deep-uv-uvc-led-module/feed/ 0     KT003 Deep UV uvc-led module https://uvleds.net/product/kt003-deep-uv-uvc-led-module/ https://uvleds.net/product/kt003-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 12:57:16 +0000 https://uvleds.net/?post_type=product&p=139
    • Good thermal management, low light decay and long service life
    • High integration, reduce module volume
    • Snap-type installation, high assembly firmness
    ]]>
  • Product photos
    • KT003
    • product mix

    KT003

    • Application field: air conditioning
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 200 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 15 / 20 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/kt003-deep-uv-uvc-led-module/feed/ 0     KT002 Deep UV uvc-led module https://uvleds.net/product/kt002-deep-uv-uvc-led-module/ https://uvleds.net/product/kt002-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 12:47:49 +0000 https://uvleds.net/?post_type=product&p=134
  • Reliable performance, high optical power and low power consumption
  • Excellent thermal management, low light decay and long service life
  • The surface is covered with glue to increase the reliability of the circuit board
  • Ultra-thin structure improves light coverage
  • Panoramic light-emitting surface, improving light-emitting angle
    • ]]>
  • Product photos
    • KT002
    • product mix

    KT002

    • Application field: air conditioning
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 120 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 14 / 20 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/kt002-deep-uv-uvc-led-module/feed/ 0     KT001 Deep UV uvc-led module https://uvleds.net/product/kt001-deep-uv-uvc-led-module/ https://uvleds.net/product/kt001-deep-uv-uvc-led-module/#respond Mon, 20 May 2024 11:46:08 +0000 https://uvleds.net/?post_type=product&p=129
  • Adopt international advanced DUVLED sterilization technology
  • Industrial standard
  • High air tightness
  • low power consumption
    • ]]>
  • Product photos
    • KT001
    • product mix

    KT001

    • Application field: air conditioning
    • Photoelectric characteristic parameters

    UVC photoelectric parameters and spec range (TA = 25 ℃, Rh = 30%)

    Item Symbol Min. Typ. Max. Unit
    working voltage Vf / 12 / V
    Driving current If / 55 / mA
    Peak wavelength λp 270 / 285 nm
    Optical power P0 8 / 12 mW
    Irritation angle 2θ1/2 / 120 / deg.
    • These values were measured by a spectral analyzer and an integrating sphere measuring system. The tolerances are as follows: operating voltage (Vf）: ± 2%; optical power (P0）: ± 10%; peak wavelength (λp）：±3.0 nm
    • Although all LEDs are tested by our equipment, some values may be slightly different depending on the conditions of the test equipment.
    • Precautions for product use
    • The product must be handled with care. It is strictly prohibited to fall and sharp tools are strictly prohibited to contact the product, especially the bright surface of lamp beads;
    • Do not use unqualified power supply for driving;
    • The product shall be used in the environment within the rated temperature range and shall not be lit for a long time in a high-temperature closed environment;
    • Do not expose the module directly in the high humidity environment, and do a good job in waterproof and moisture-proof isolation;
    • If the product needs a transparent window, it is recommended to use high-purity quartz glass plate, which can effectively penetrate ultraviolet rays.
    • Human protection
    Human protection
    • All assembly workers, observers and bystanders must have eye and skin protection;
    • It is forbidden to observe with naked eyes (including through microscope) and handle deep UV LED naked in operation;
    • Do not touch the optical structure of the deep UV lamp bead;
    • This product is a humidity sensitive product, the recommended storage temperature is 18 ℃～ 30 ℃, the humidity is 30% ～ 60%, and sealed. In order to ensure the product quality, it is recommended to use it within one year after leaving the factory if the outer packing bag is not opened; if the outer packing bag is opened, it is recommended to use it within 24 hours, and re seal it for storage after 24 hours. Dehumidification measures should be taken before the next use: temperature: 65 ℃ time: 5h.
    ]]>     https://uvleds.net/product/kt001-deep-uv-uvc-led-module/feed/ 0